Buy a 3 porst fxo card and 1port fxs (green) card from digium.
Plug your fax the the fxs port.
Assign an extension to the fax at extension.conf
Create a menu.
Since the call will be bridged from fxo to fxs natively, there is very
few loss and the fax works ok.
Anyway, the diferrence between having the tdp400 with 3 or 4 porst isn´t
much...
Angus Comber wrote:
Hello
I want to setup an Asterisk with three analog lines. Two of the analog
lines are the main office number. The other line is the fax number.
The fax machine plugs into the line 3 but also will be a connection to
the third port on a Digium analog card.
Reason for the third line into Asterisk is so if two lines in use
someone can still dial out over third (fax) line.
Is this going to cause a problem? How would I stop the Idiom card
answering on line 3?
Angus
------------------------------------------------------------------------
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
