On Wednesday 03 August 2005 17:33, Jens von Bülow wrote: > Gavin, > > >> Any ideas/advice would be warmly received right now! > > You are not going to like my response...
Erk :) > The only way I could get this to work (luckily I had 2 identical sites and > was busy with the upgrade to the gen2 card) was to downgrade to zaptel > 1.0.7. Alas no - just moved down to zaptel, libpri and asterisk 1.0.7 with identical behaviour, both with span=1,0,0,ccs,hdb3,crc4 and span=1,1,0,ccs,hdb3,crc4 - I don't have any other active spans in the system :/ Tim Panton: As above, I've already tried timing source twiddles (and even changing the build-out length values, even though the cable is 2 metres :)) My whole zaptel.conf is span = 1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 loadzone=uk defaultzone=uk With zapata.conf snippet: switchtype=euroisdn immediate=no overlapdial=yes pridialplan=unknown prilocaldialplan=unknown group = 1 signalling=pri_net context = fromaxxess channel => 1-15 Cheers, Gavin. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
