Hello, I am trying to setup my Asterisk box to accept calls from the FWD network. I've followed all the config advice / samples I've found on the web. Making calls to devices on the FWD network from my Asterisk box works flawlessly, but whenever I try to call my Asterisk box from a FWD client I get a busy signal, and a "Call Disconnected" 486 error.
What's odd is that I don't see any debug info from the console (iax2 debug). I've tried forwarding UDP port 4569 to my Asterisk box and no diff. Anyone have any advice? Cheers! kswail =========================================================== Here are relevant parts of my configs ----------------------------------------------------------- iax.conf ----------------------------------------------------------- register=xxxxx:[EMAIL PROTECTED] [fwd] username=xxxxx type=peer secret=yyyyyyyy qualify=yes host=iax2.fwdnet.net auth=md5 [fwd-in] type=user inkeys=freeworlddialup context=from-pstn auth=rsa =========================================================== Here is output from the asterisk console as it pertains to IAX2 ----------------------------------------------------------- asterisk*CLI> iax2 show registry Host Username Perceived Refresh State 65.39.205.121:4569 xxxxx 00.00.00.244:4569 60 Registered ----------------------------------------------------------- asterisk*CLI> iax2 show peers Name/Username Host Mask Port Status fwd/xxxxx 65.39.205.121 (S) 255.255.255.255 4569 OK (15 ms) ----------------------------------------------------------- _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
