Mark Johnson wrote:
Hi Mark,
I've done this using SPA-2000, SPA-2000 can generate polarity
reversal signal, The pay-phone detects "call answer" and "hangup" by
revesal signal.
also the pay-phone must be supported polarity reversal detection.
Anyone got any suggestions? I need to know what piece of hardware I
need (ATA preferably) that allows me to pick up an analog phone, sit
idle and not get the reorder tones for at least 1 minute. I am
currently using a Cisco ATA-188 and I get them at 10 seconds. I've
monkeyed with every single bit of the config file and can't seem to
extend or disable it. HELP!!
Help is on the way:)
This is quite simple to achieve on Sipura units. There is a parameter
called
Dial Tone: [EMAIL PROTECTED],[EMAIL PROTECTED];10(*/0/1+2)
It defines the frequencies and duration of the tone. The "10" you see
near the end is the duration. Simply change it to 60 like this and
you're done:
Dial Tone: [EMAIL PROTECTED],[EMAIL PROTECTED];60(*/0/1+2)
I just tried it and it works like you want it.
Hope it helps.
--
Andres
Network Admin
http://www.telesip.net
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
