Did you install the license file as per the instructions? Starting version
4.0 Snom thought it would be nice to be a real pain in the ass to people
with a lot of Snom phones. You need to go to a webpage and enter the mac
address of the phone and they will send you a license file.
Only after you install the license file the phone will make a SIP
connection.
How nice if you have approx 40 phones that need upgrading :(
Snom never replied to my complaint about the license thing, i have 40
users that are unable to do that themselves unless I take 3 hours per user
to explain it and I can do it quicker myself......
I have the same problems too btw, low memory errors and broken displays on
some phones (one or two lines are completely dead). I still have to RMA
the phones.
On Fri, 5 Aug 2005, Michael George wrote:
I have a pair of snom 360s at a customer and they were giving me Low Memory
errors. The distributor suggested updating the firmware. I did that, to the
one just below 4.0 (which wasn't released yet). One of the phones is still
giving the Low Memory error every 3-4 days. The other one had a broken
display that was just RMA'd, so it' hasn't been up long enough to know if the
error occurs on that one, too.
The distributor's latest suggestion was to go to the newest firmware, 4.0. I
did that on the new 360 (from the RMA) and with the same account settings as
the one it was replacing, it could not register with *.
Since I was in a pinch, I "updated" the firmware down to the latest below 4.0
and the phone works just fine.
Does anyone with more knowledge than I know what might be going on? Maybe a
new default setting in 4.0 that's breaking things?
Thank you.
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
