By reading the Introduction to MFC R2 Signaling here:
http://www.sunrisetelecom.com/technotes/TEC-GEN-2B-MFCR2.pdf
and setting my unicall.conf to this
(...)
protocolclass=mfcr2
protocolvariant=mx,10,1
protocolend=cpe
group = 1
channel => 1-10
i got my UC show channels show my 10 lines in state "idle" as it is
supposed to be. Previously they were "blocked".
then i have an issue with ANI and DNI digits, i have 10 numbers
reachable from the PSTN: from 4772140000 to 4772140009. And 10 channels
in my E1.
So is the "protocolvariant=mx,10,1" correct or what do ANI, DNI exactly
mean?
Or maybe it is an error in the .call file i use for testing:
----.call file---
Channel: UniCall/g1/1
Callerid: <4772140000>
MaxRetries: 0
RetryTime: 600
WaitTime: 600
Context: default
Extension: 014433052573 <-- desired PSTN number to be called
Priority: 1
-------------------
Because i get (almost) the same errors:
-- Attempting call on UniCall/g1/1 for [EMAIL PROTECTED]:1 (Retry 1)
Aug 6 08:15:52 WARNING[31993]: chan_unicall.c:1240 unicall_call: Make
Call failed - Blocked
Aug 6 08:15:52 NOTICE[31993]: channel.c:1827 __ast_request_and_dial:
Unable to request channel UniCall/g1/1
-- Hungup 'UniCall/1-1'
Aug 6 08:15:52 NOTICE[31993]: pbx_spool.c:229 attempt_thread: Call
failed to go through, reason 0
-- Attempting call on UniCall/g1/1 for [EMAIL PROTECTED]:1 (Retry 1)
Aug 6 08:15:52 WARNING[31993]: chan_unicall.c:1240 unicall_call: Make
Call failed - Blocked
Aug 6 08:15:52 NOTICE[31993]: channel.c:1827 __ast_request_and_dial:
Unable to request channel UniCall/g1/1
-- Hungup 'UniCall/1-1'
Aug 6 08:15:52 NOTICE[31993]: pbx_spool.c:229 attempt_thread: Call
failed to go through, reason 0
GtoSkyCentral*CLI>
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
