On Sat, 2005-08-06 at 16:14 +0600, Madhawa Jayanath wrote: > Kumara Jayaweera wrote: > > >Hi all, > >Does anyone run Asterisk on FC4? with Digium's TDM40B cards. any success > >stories? my Intel 865 M'd+ Intel 3.0GHz freezee during installation (FC4). > >Please any comments? > > > >Kumara > > > > > > > >_______________________________________________ > >Asterisk-Users mailing list > >[email protected] > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > > Hello Kumara, > Yes, Without problems. > Can u install RH9 on ur box? > > Cheers, > ~Madhawa >
I'm assuming that Madhawa is suggesting that you install RH9. I've installed Asterisk on FC4 with very few problems. Start with a standard FC4 installation then install the following rpms from atrpms.net: asterisk-addons asterisk-sounds zaptel zaptel-devices If you already have it set up in yum you can just use: yum install asterisk asterisk-addons asterisk-sounds zaptel zaptel-devices If the atrpm repo isn't set up in yum just copy the following to /etc/yum.repos.d/atrpms.repo --->CUT<--- # # [atrpms] name=Fedora Core 4 - i386 - ATrpms baseurl=http://dl.atrpms.net/fc4-i386/atrpms/stable failovermethod=priority # # requires stable # [atrpms-testing] name=Fedora Core 4 - i386 - ATrpms testing baseurl=http://dl.atrpms.net/fc4-i386/atrpms/testing failovermethod=priority enabled=0 # # requires stable and testing # [atrpms-bleeding] name=Fedora Core 4 - i386 - ATrpms bleeding baseurl=http://dl.atrpms.net/fc4-i386/atrpms/bleeding failovermethod=priority enabled=0 --->CUT<--- One little problem. Maybe it's been fixed but last time I checked it wasn't. In the /etc/init.d/zaptel the path to ztcfg is incorrect. Find all references to ztcfg and change them to => /usr/sbin/ztcfg You can copy the sample configs from /usr/share/doc/asterisk-1.0.9/configs/ to get you going. Running asterisk -c -vvv will let you know which ones you need. The rest is going to be specific to your hardware and setup. Good luck. _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
