On 8/6/2005, "Frank Tarczynski" <[EMAIL PROTECTED]> wrote: > I'm trying to set-up H.323 support under Asterisk. I built a recent > CVS release and the ooh323c code from the asterisk-addons. Everything > built and installed and the H.323 stuff loads OK when asterisk starts. > > What is the easiest way to check if the H.323 code is working? I've > edited the h323.conf and extensions.conf files but I'm sure that things > aren't right. I've tried connecting to my asterisk box via netmeeting > but I'm having much success. I don't know if my conf files are > screwed-up or if ooh323c code isn't working. > > Can anyone help?
You should have some 'new' CLI commands if ooH323 got loaded. h323 show config Show details on global configuration of H.323 channel driver h323 show peers Show defined H323 peers h323 show peer Show details on specific H323 peer h323 show users Show defined H323 users h323 show user Show details on specific H323 user h323 debug Enable H323 debugging h323 no debug Disable H323 debugging h323 conf is just about 'normal' except I did have to set the bindaddr to my machines IP - localhost or 0.0.0.0 did not work. [6633] type=friend context=default ip=192.168.10.22 ; UPDATE with appropriate ip address port=1720 ; UPDATE with appropriate port h323id=6633 disallow=all allow=ulaw ;allow=gsm outgoinglimit=2 incominglimit=2 ;e164=12345 rtptimeout=60 dtmfmode=rfc2833 I used a AT320 with the latest H323 firmware and it worked quite well. I have never used NetMeeting so can't help you with that setup. Brett _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
