why not go back into your * src tree and 'make samples'?
On Tue, 2005-08-09 at 10:59, Jonas Arndt wrote: > Hi Zoa, > > Nope, I didn't. I thought I was VERY clear on that point. What I did was > following the guidlines in the "An introduction to Asterisk" document.It > told me to create certain conf files in /etc/asterisk and then start it, > which I did. > > In any case, I find it EXTREMELY hard to believe that an application > should SegFault from missing configuration files. There's gotta be > something else going on here, wouldn't you agree? > > // Jonas > > Zoa wrote: > > > > > Did you ever try asterisk on a non itanium ? > > > > You dont have a single configuration file on your machine, of course it > > doesnt work :p > > > > zoa > > > > Jonas Arndt wrote: > > > >> Hi, > >> > >> The story never ends.... After a succesful buld without gsm codec, I > >> installed it and ran: > >> > >> itanium:/etc/asterisk # /usr/sbin/asterisk -cvvv > >> == Parsing '/etc/asterisk/asterisk.conf': Not found (No such file or > >> directory) > >> == Parsing '/etc/asterisk/extconfig.conf': Not found (No such file or > >> directory) > >> Asterisk CVS-HEAD, Copyright (C) 1999 - 2005 Digium. > >> Written by Mark Spencer <[EMAIL PROTECTED]> > >> ========================================================================= > >> > >> == Parsing '/etc/asterisk/logger.conf': Not found (No such file or > >> directory) > >> Asterisk Event Logger Started /var/log/asterisk/event_log > >> Asterisk Dynamic Loader loading preload modules: > >> == Parsing '/etc/asterisk/modules.conf': Found > >> == Manager registered action Ping > >> == Manager registered action Events > >> == Manager registered action Logoff > >> == Manager registered action Hangup > >> == Manager registered action Status > >> == Manager registered action Setvar > >> == Manager registered action Getvar > >> == Manager registered action Redirect > >> == Manager registered action Originate > >> == Manager registered action Command > >> == Manager registered action ExtensionState > >> == Manager registered action AbsoluteTimeout > >> == Manager registered action MailboxStatus > >> == Manager registered action MailboxCount > >> == Manager registered action ListCommands > >> == Parsing '/etc/asterisk/manager.conf': Not found (No such file or > >> directory) > >> == Parsing '/etc/asterisk/cdr.conf': Not found (No such file or > >> directory) > >> == Parsing '/etc/asterisk/rtp.conf': Not found (No such file or > >> directory) > >> == RTP Allocating from port range 5000 -> 31000 > >> Asterisk PBX Core Initializing > >> Registering builtin applications: > >> [AbsoluteTimeout] > >> == Registered application 'AbsoluteTimeout' > >> [Answer] > >> == Registered application 'Answer' > >> [BackGround] > >> == Registered application 'BackGround' > >> [Busy] > >> == Registered application 'Busy' > >> [Congestion] > >> == Registered application 'Congestion' > >> [DigitTimeout] > >> == Registered application 'DigitTimeout' > >> [Goto] > >> == Registered application 'Goto' > >> [GotoIf] > >> == Registered application 'GotoIf' > >> [GotoIfTime] > >> == Registered application 'GotoIfTime' > >> [ExecIfTime] > >> == Registered application 'ExecIfTime' > >> [Hangup] > >> == Registered application 'Hangup' > >> [NoOp] > >> == Registered application 'NoOp' > >> [Prefix] > >> == Registered application 'Prefix' > >> [Progress] > >> == Registered application 'Progress' > >> [ResetCDR] > >> == Registered application 'ResetCDR' > >> [ResponseTimeout] > >> == Registered application 'ResponseTimeout' > >> [Ringing] > >> == Registered application 'Ringing' > >> [SayNumber] > >> == Registered application 'SayNumber' > >> [SayDigits] > >> == Registered application 'SayDigits' > >> [SayAlpha] > >> == Registered application 'SayAlpha' > >> [SayPhonetic] > >> == Registered application 'SayPhonetic' > >> [SetAccount] > >> == Registered application 'SetAccount' > >> [SetAMAFlags] > >> == Registered application 'SetAMAFlags' > >> [SetGlobalVar] > >> == Registered application 'SetGlobalVar' > >> [SetLanguage] > >> == Registered application 'SetLanguage' > >> [Set] > >> == Registered application 'Set' > >> [SetVar] > >> == Registered application 'SetVar' > >> [ImportVar] > >> == Registered application 'ImportVar' > >> [StripMSD] > >> == Registered application 'StripMSD' > >> [Suffix] > >> == Registered application 'Suffix' > >> [Wait] > >> == Registered application 'Wait' > >> [WaitExten] > >> == Registered application 'WaitExten' > >> Asterisk Dynamic Loader Starting: > >> == Parsing '/etc/asterisk/modules.conf': Found > >> [chan_modem.so] => (Generic Voice Modem Driver) > >> == Parsing '/etc/asterisk/modem.conf': Found > >> == Loading modem driver chan_modem_aopen.so => (A/Open (Rockwell > >> Chipset) ITU-2 VoiceModem Driver) > >> == Registered channel type 'Modem' (Generic Voice ModemChannel Driver) > >> [res_musiconhold.so] => (Music On Hold Resource) > >> == Registered application 'MusicOnHold' > >> == Registered application 'WaitMusicOnHold' > >> == Registered application 'SetMusicOnHold' > >> == Registered application 'StartMusicOnHold' > >> == Registered application 'StopMusicOnHold' > >> == Parsing '/etc/asterisk/musiconhold.conf': Not found (No such file > >> or directory) > >> [res_agi.so] => (Asterisk Gateway Interface (AGI)) > >> == Registered application 'DeadAGI' > >> == Registered application 'EAGI' > >> == Registered application 'AGI' > >> [res_adsi.so] => (ADSI Resource) > >> == Parsing '/etc/asterisk/adsi.conf': Not found (No such file or > >> directory) > >> [res_features.so] => (Call Features Resource) > >> == Parsing '/etc/asterisk/features.conf': Not found (No such file or > >> directory) > >> == Parsing '/etc/asterisk/parking.conf': Not found (No such file or > >> directory) > >> -- Registered extension context 'parkedcalls' > >> -- Added extension '700' priority 1 to parkedcalls > >> == Registered application 'ParkedCall' > >> == Registered application 'Park' > >> == Manager registered action ParkedCalls > >> [res_crypto.so] => (Cryptographic Digital Signatures) > >> -- Loaded PUBLIC key 'iaxtel' > >> -- Loaded PUBLIC key 'freeworlddialup' > >> [res_indications.so] => (Indications Configuration) > >> == Parsing '/etc/asterisk/indications.conf': Not found (No such file > >> or directory) > >> == Registered application 'PlayTones' > >> == Registered application 'StopPlayTones' > >> [res_monitor.so] => (Call Monitoring Resource) > >> == Registered application 'Monitor' > >> == Registered application 'StopMonitor' > >> == Registered application 'ChangeMonitor' > >> == Manager registered action Monitor > >> == Manager registered action StopMonitor > >> == Manager registered action ChangeMonitor > >> [chan_sip.so] => (Session Initiation Protocol (SIP)) > >> == Registered channel type 'SIP' (Session Initiation Protocol (SIP)) > >> == Parsing '/etc/asterisk/sip.conf': Not found (No such file or > >> directory) > >> == Unregistered channel type 'SIP' > >> Segmentation fault > >> itanium:/etc/asterisk > >> # > >> > >> > >> As you can see it ended with a SegFault. > >> > >> Any ideas? Did anybody build successfully on Itanium? > >> > >> Thanks, > >> > >> // Jonas > >> > >> > >> > >> Hi Again, > >> > >> I removed codec_gsm.so from codecs/Makefile and the build work. Like I > >> said, I am not too familiar with Asterisk yet. What implications will > >> this have to the functionality? > >> > >> Thanks, > >> > >> // Jonas > >> > >> > >> > >> Jonas Arndt wrote: > >> > >>> Thanks Guys, > >>> > >>> I should have mentioned that I have already tried to remove the flag. > >>> What happens then is that I run into other issues. > >>> > >>> ========================================================================= > >>> > >>> > >>> gcc -pipe -Wall -Wstrict-prototypes -Wmissing-prototypes > >>> -Wmissing-declarations > >>> -g -Iinclude -I../include -D_REENTRANT -D_GNU_SOURCE -O6 > >>> -DZAPTEL_OPTIMIZAT > >>> IONS -fomit-frame-pointer -fPIC -c > >>> -DNeedFunctionPrototypes=1 -fun > >>> roll-loops -fPIC -O6 -DSASR -DNDEBUG -DWAV49 -I./inc src/table.c > >>> as -o src/k6opt.o src/k6opt.s > >>> src/k6opt.s: Assembler messages: > >>> src/k6opt.s:9: Error: unknown pseudo-op: `.value' > >>> src/k6opt.s:10: Error: unknown pseudo-op: `.value' > >>> src/k6opt.s:11: Error: unknown pseudo-op: `.value' > >>> src/k6opt.s:12: Error: unknown pseudo-op: `.value' > >>> src/k6opt.s:13: Error: unknown pseudo-op: `.value' > >>> src/k6opt.s:14: Error: unknown pseudo-op: `.value' > >>> src/k6opt.s:15: Error: unknown pseudo-op: `.value' > >>> src/k6opt.s:16: Error: unknown pseudo-op: `.value' > >>> src/k6opt.s:17: Error: unknown pseudo-op: `.value' > >>> src/k6opt.s:18: Error: unknown pseudo-op: `.value' > >>> src/k6opt.s:19: Error: unknown pseudo-op: `.value' > >>> src/k6opt.s:20: Error: unknown pseudo-op: `.value' > >>> src/k6opt.s:27: Error: Unknown opcode `pushl %ebp' > >>> src/k6opt.s:28: Error: bad expression > >>> src/k6opt.s:28: Error: Illegal operandseparator `e' > >>> src/k6opt.s:29: Error: Unknown opcode `pushl %edi' > >>> src/k6opt.s:30: Error: Unknown opcode `pushl %esi' > >>> src/k6opt.s:31: Error: Unknown opcode `pushl %ebx' > >>> src/k6opt.s:32: Error: Illegal operand separator `(' > >>> src/k6opt.s:33: Error: Illegal operand separator `(' > >>> src/k6opt.s:34: Error: bad expression > >>> src/k6opt.s:34: Error: Illegal operand separator `e' > >>> src/k6opt.s:35: Error: Unknown opcode `emms' > >>> src/k6opt.s:36: Error: bad expression > >>> src/k6opt.s:36: Error: Illegal operand separator `e' > >>> src/k6opt.s:36: Error: Unknown opcode `movd %eax,%mm5' > >>> src/k6opt.s:37: Error: Unknown opcode `movq coefs,%mm1' > >>> src/k6opt.s:38: Error: Unknown opcode `movq coefs+8,%mm2' > >>> src/k6opt.s:39: Error: Unknown opcode `movq coefs+16,%mm3' > >>> src/k6opt.s:40: Error: Unknown opcode `xorl %esi,%esi' > >>> src/k6opt.s:43: Error: Unknown opcode `movq (%ebx,%esi,2),%mm0' > >>> src/k6opt.s:44: Error: Unknown opcode `pmaddwd %mm1,%mm0' > >>> src/k6opt.s:46: Error: Unknown opcode `movq 8(%ebx,%esi,2),%mm4' > >>> src/k6opt.s:47: Error: Unknown opcode `pmaddwd %mm2,%mm4' > >>> src/k6opt.s:48: Error: Unknown opcode `paddd %mm4,%mm0' > >>> src/k6opt.s:50: Error: Unknown opcode `movq 16(%ebx,%esi,2),%mm4' > >>> src/k6opt.s:51: Error: Unknown opcode `pmaddwd %mm3,%mm4' > >>> src/k6opt.s:52: Error: Unknown opcode `paddd %mm4,%mm0' > >>> ========================================================================= > >>> > >>> > >>> > >>> Thanks, > >>> > >>> // Jonas > >>> > >>> Kevin P. Fleming wrote: > >>> > >>>> Jonas Arndt wrote: > >>>> > >>>>> The problem I am currently facing seem to be in the codecs/gsm > >>>>> directory. I am getting the error: > >>>>> =============================================================== > >>>>> make[2]: Entering directory `/usr/src/asterisk/codecs/gsm' > >>>>> if [ ! -d ./lib ] ; then mkdir ./lib ; fi > >>>>> gcc -pipe -Wall -Wstrict-prototypes -Wmissing-prototypes > >>>>> -Wmissing-declarations -g -Iinclude -I../include -D_REENTRANT > >>>>> -D_GNU_SOURCE -O6 -DZAPTEL_OPTIMIZATIONS > >>>>> -fomit-frame-pointer -fPIC -c -DNeedFunctionPrototypes=1 > >>>>> -funroll-loops -fPIC -O6 -march=ia64 -DSASR -DNDEBUG -DWAV49 > >>>>> -I./inc src/add.c > >>>>> cc1: error: invalid option `arch=ia64' > >>>>> =============================================================== > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> The GSM Makefile is somewhat stupid in this regard; it also fails on > >>>> x86-64 machines. I'd suggest just editing codecs/gsm/Makefile to > >>>> remove the 'arch' flag, since it really won't make a big difference, > >>>> especially if you aren't doing GSM transcoding. > >>>> _______________________________________________ > >>>> Asterisk-Users mailing list > >>>> Asterisk-Users@lists.digium.com > >>>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>>> To UNSUBSCRIBE or update options visit: > >>>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>> > >>> > >>> > >>> > >>> > >>> _______________________________________________ > >>> Asterisk-Users mailing list > >>> Asterisk-Users@lists.digium.com > >>> http://lists.digium.com/mailman/listinfo/asterisk-users > >>> To UNSUBSCRIBE or update options visit: > >>> http://lists.digium.com/mailman/listinfo/asterisk-users > >> > >> > >> > >> > >> _______________________________________________ > >> Asterisk-Users mailing list > >> Asterisk-Users@lists.digium.com > >> http://lists.digium.com/mailman/listinfo/asterisk-users > >> To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > >------------------------------------------------------------------------ > > > >_______________________________________________ > >Asterisk-Users mailing list > >Asterisk-Users@lists.digium.com > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS/GIT> d-@ s+:+ a? C+++ BLHIS$ U+++ P+> L+++ !E W+++$ N++ o+ K w-- PS+++ PE@ Y+ PGP++ t 5? X !R tv+ b- DI-- D G e+> h---- r+++ y++++ ------END GEEK CODE BLOCK------
signature.asc
Description: This is a digitally signed message part
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users