What about a PRI/BRI solution We have a few with the voicetronix openline 4 cards and they work ok But the PRI solution work better.We have a 4 port sangoma configured like that.If I recall you set it to pri_net instead of pri_cpe and you use a cross cable
On Tue, 2005-08-09 at 10:59 -0700, Edwin Lam wrote: > hi folks. > > i'm planning to connect * to 120 POTS line. i've done some research > on FXO cards but unfortunately most manufacturers only make 4 ports/card. > the most i've found is 12 ports. so do i have to get 10 of these cards > and setup 3 Asterisk servers (assuming each have 4 free PCI slots) link > them together with some insane dialplan? or is there an easier way? > > any suggestions? comments? remarks? parameters? > thx. -- Thanks Altus Snyman Stormcorp Network Solutions +27 11 8071141 exten 301 _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users