Or you could use the local channel and branch it off to as many contexts as needed with different contexts that use different times for the dial.
On 8/9/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > On 8/10/2005, "Irakli Natsvlishvili" > <[EMAIL PROTECTED]> wrote: > > > Hello, > > > > I know that using & it is possible to dial several channels. > > > > Question is - is it possible and if yes, how to dial several channels with > > different ringing timeout? > > > > I mean the following - for example when SIP/500 is dialed, I want three > > phones to be dialed simultaneously - 1000, 2000 and 3000. During 10 > > seconds all phones are ringing, next 10 second phones 2000 and 3000 are > > ringing and after 20 seconds only extension 3000 is ringing. > > > > If I use & in dial command, then all extensions are ringing > >simultaneously, but ringing timeout after comma is set for all channels, > > am I right? > > > > 500,1,Dial(SIP/1000&SIP/2000&SIP/3000,30) > > So be creative! 8-) > > 500,1,Dial(SIP/1000&SIP/2000&SIP/3000,10) > 500,2,Dial(SIP/2000&SIP/3000,10) > 500,3,Dial(SIP/3000,10) > > Total ring time 30 seconds after the call. > > This could get a little convoluted depending on what you really want to do > with it. > > Brett > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
