Hmmm.. This is odd. Can you log on to the asterisk console (asterisk -r) and post what is happening when you pick up the line? Also, it couldn't hurt to post the contents of your:
/etc/zaptel.conf /etc/asterisk/zapata-auto.conf /etc/asterisk/zapata_additional.conf Tom > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Wednesday, August 10, 2005 4:23 PM > To: [email protected] > Subject: RE: [Asterisk-Users] TDM40B and weird analog problem > > > Tom, > > Thanks for the response, here are my answers. > > How did you set up the zaptel cards originally? > - I used the digium install instructions and genzaptelconf > > Did you remember to plug in a power adapter to the TDM card? > - Yes, both cards are powered. > > Also, to clarify, if you plug a cordless phone into port1 of > the FXS card and > pick up the phone to dial, all of the other ports on the FXS > card ring? > - No, when I pick up the phone to dial all SIP extensions > start to ring. > > This is before you dial? > - Yes > > Does the incoming FXO card's ports work fine? Incoming calls > are routed > properly? > - Yes and Yes > > Have you tried removing the ring group and testing then? > - Yes, to no avail. > > Any further help would be greatly appreciated. > > Thanks, > Marc > > -----Original Message----- > How did you set up the zaptel cards originally? Have you run > genzaptelconf? Did > you remember to plug in a power adapter to the TDM card? > Also, to clarify, if you plug a cordless phone into port1 of > the FXS card and > pick up the phone to dial, all of the other ports on the FXS > card ring? This is > before you dial? > Does the incoming FXO card's ports work fine? Incoming calls > are routed > properly? > Have you tried removing the ring group and testing then? > Tom > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Wednesday, August 10, 2005 1:06 PM > To: [email protected] > Subject: [Asterisk-Users] TDM40B and weird analog problem > > > OK, I have a Asterisk @ Home 1.0.7 server with two Digium > TDM400 cards, one 4 > port FXO and one 4 port FXS. When I plug an analog cordless > phone into the > TDM40B card and setup a ZAP extension, the phone rings in and > you can answer > just fine. The weird part is when you try to get dialtone > from the cordless > handset it rings all of the other extensions... One other > thing to mention is > that the cordless phone is a part of a ring group that rings > 4 total extensions > but that should only be on the incoming ringing, right? > > Any help is greatly appreciated. > > Thanks, > Marc > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users To > UNSUBSCRIBE or > update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
