The VoIP Connection a écrit :
Nicolas,
Just did some quick testing and the instructions are incorrect. You need to
press "transfer" to complete the transfer instead of the second "flash".
This actually makes more sense.
Attended and regular transfer both work perfectly with the following
settings:
Enable Call Features: "Yes"
Disable call Waiting: "No"
Send Flash event: "No"
DTMF should be whatever * is set to, but in-band won't work properly if your
codec is anything other than U-Law.
By the way, the newest firmware also makes the long overdue conference
feature work properly.
Michael Crown
Managing Partner
www.thevoipconnection.com
321.989.6728 ext. 611
sip:[EMAIL PROTECTED]
-----Original Message-----
From: Nicolas Schmerber [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 11, 2005 10:41 AM
To: [EMAIL PROTECTED]; Asterisk Users
Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Supervised transfer problem
with BudgetTone
The VoIP Connection a écrit :
Section 4.3.7.2 from the Bugetone Manual:
The user can transfer an active call to a third party with
announcement.
The user presses the “flash” button and hears a dial tone, then dial
the 3rd party’s phone number followed by pressing send
button. If the
call is answered, press “flash” to complete the transfer
operation, if
the call is not answered, pressing “flash” button to resume the
original call.
Notes:
• If attended Transfer fails, the BudgeTone phone will ring
the user to
remind that another party is still on the call, the user can
then pick
up the call using handset or speaker.
Michael Crown
Managing Partner
www.thevoipconnection.com
321.989.6728 ext. 611
sip:[EMAIL PROTECTED]
-----Original Message-----
From: Nicolas Schmerber [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 11, 2005 5:59 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Supervised transfer problem with
BudgetTone
[EMAIL PROTECTED] a écrit :
On Thu, 11 Aug 2005, Nicolas Schmerber wrote:
All the features I need work just not one : the supervised call
transfers. I know there are a lot of posts about that, but
none gave
me the correct answer (unless I missed it).
Hi,
You'll need to switch to the CVS-HEAD version of Asterisk in
order to
have supervised transfers.
Steve
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
When looking at a recent firmware changelog of Grandstream
, it says
BT should support supervised transfer, so shouldnt it work ?
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Tried this manipulation a few minutes ago :
A calls B , B pushes flash button ( A is waiting with a mp3
played) B calls C pressing Send ; C answers B presses flash
button again ; C is so on hold (with a mp3 played) B hangs up
But A and C arent in connect ; the phoneof B rings ( to tell
someone is in wait : A)
So it seems to fail
What should i put in grandstream config for the next item :
/Enable Call Features: Y/ N ?
//Disable Call-Waiting: Y/N ?
//Send DTMF: / in-audio / via RTP (RFC2833) / via SIP INFO
/Send Flash Event: Y / N ? / Any others Ideas ?.
Thx
Nicolas S.
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Thank you all, now it works
The last method (grandsteam manual but with transfer key instead) was
the right
Thanks
Nicolas
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
