Jon Pounder wrote: >> Bruce Ferrell wrote: >> >>> You need to be looking at a "lower" level >> >> Like hw/cabling errors?? If so, that's what I was afraid of for cost >> reasons. > > no - the stuff you found relates to configuring one 64k channel of > the T1, you need to find the settings to configure the overall t1. > > - someone mentioned the encoding settings - its not that or you would > be getting more than just a blue alarm, it would not be working > period. > > - you need to look for clock source settings, and set those. > > have your asterisk t1 card generate the clock on the asterisk TX side > for sure. it sounds like the pbx just generates its own tx clock > based on the rx data which is what you want (that might be faulty who > knows). if it can generate its own tx clock from a crystal try that > instead and see if it helps. >
Thanks Jon. I'm not savvy enough in this arena to completely understand your suggestions. I have the asterisk t1 card providing the timing as I understand it: span=1,0,0,d4,ami I found these settings on the legacy PBX as well, not sure if they mean anything: drop pulse: 014 pause time: 005s flash time: 025*50ms Orbit recall: 120*10s Do these relate to /etc/asterisk/zapata.conf settings like so: ; A variety of timing parameters can be specified as well ; Including: ; prewink: Pre-wink time (default 50ms) ; preflash: Pre-flash time (default 50ms) ; wink: Wink time (default 150ms) ; flash: Flash time (default 750ms) ; start: Start time (default 1500ms) ; rxwink: Receiver wink time (default 300ms) ; rxflash: Receiver flashtime (default 1250ms) ; debounce: Debounce timing (default 600ms) ; emdigitwait: Time to wait for DID digits on E&M links (default 250ms) (Increase to 500 ; or so if you are not getting all DID digits on your E&M link) Thanks, Geoff _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
