Rich Adamson wrote:
I have an [EMAIL PROTECTED] 1.3 server (Asterisk 1.0.9) and recently added a
TDM400P with (1) FXO card on port 4. Inbound calls are always successful
but outbound calls fail 75% of the time with intercept messages from my
dial tone provider that include "we're sorry, your call did not go
through", and "we're sorry, when placing a local call it is now
necessary to dial an area code and the 7-digit number".
Add a "w" in the dial string within extensions.conf. The "w" adds a short
delay before sending the dtmf to the telco, which is likely happening
too fast for the telco switch.
Is that undocumented?
The wiki entry for the Dial() command says:
w: Allow the /called/ user to start recording after pressing *1 or what
defined in features.conf (Asterisk > v1.0.x)
To add a short delay to one of my remote FXO lines, I added A(silence/2)
to the dial string.
--
JP Carballo
http://www.netfone2x.com
Bringing the world closer.
It might look like I'm doing nothing, but at the cellular level, I'm really quite busy.
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
