At firewall/NAT you have to do port forwarding.
If your phone is at port 5060, NAT device will receive a connection and has
to know that it is destined for your SIP phone. So, forward port 5060 to the
phone.
Rudolf
----- Original Message -----
From: "Kamran Ahmad" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Sunday, August 14, 2005 6:52 AM
Subject: [Asterisk-Users] Why NAT problem
hello
i am using asterisk-1.0.9. i have a NAT problem.
without NAT registration is ok. and if user is bhind
NAT it is registring on asterisk. but SJPhone is
showing "not registered". i think asterisk is properly
sending request to UA. any comments............this
sip.conf setting was working previously
-- Registered SIP '5000' at 0.0.0.0 port 5060
expires 120
-- Saved useragent "SJLabs-SJphone/1.40.258" for
peer 5000
[general]
context=default
port=5060
bindaddr=0.0.0.0
srvlookup=yes
nat=yes
canreinvite=no
[5000]
type=friend
port=5060
canreinvite=no
host=dynamic
nat=yes
insecure=yes
auth=plaintext
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
