On Sat, Aug 13, 2005 at 10:17:17PM -0700, Paul Mahler wrote: > Note that the single line card will not work in a variety of more recent > servers including Dell servers. > > First, you have to get the card configured to run with Linux. This means > loading the correct driver and then configuring the driver. The driver > configuration information is held in the file /etc/zaptel.conf. Here is what > you need in zaptel.conf to configure your single port FXO board: > > loadzone=us > defaultzone=us > fxsls=1 ; fxl interface on fxo port > ; channel one > ; loop start
Why loopstart and not kewlstart? Also, for a Little Shell Script that will give you a good start for zaptel.conf/zapata.conf try http://tzafrir.org.il/genzaptelconf . This should give even something slightly working for PRI/BRI cards. -- Tzafrir Cohen | [EMAIL PROTECTED] | VIM is http://tzafrir.org.il | | a Mutt's [EMAIL PROTECTED] | | best ICQ# 16849755 | | friend _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users