> On 8/13/05, Tom Rymes <[EMAIL PROTECTED]> wrote: > snip sean .... > > > > This is not that difficult. The first question you need to > answer is > > whether you want to use a dedicated circuit (E1/T1/PRI) or multiple > > copper lines. This mostly depends on the call volume that > you will be > > handling. Depending on your choice, you can install either > a Sangoma > > or a Digium card to handle a dedicated circuit or you can > use a Digium > > TDM400B card or a PSTN gateway to connect to your POTS phone lines. > > > > Tom > > > I'n so new to asterisk there is still a bright shiny wrapper on me. > > As I consider options for asterisk I would like to know... is > it possible to split an existing data T1 for use with both > data and voip or another variant of voice service or does it > need to be dedicated to voice. > > along this line... a really good and useful FAQ is what I need.
Bill, Maybe you should purchase Paul Mahler's book or another that serves as an introduction to VOIP/phone technology. Paul's is available at signate.com, and though it was written w while back, it will still give you a good feel for where you should start. Beyond that, I would consider hiring a consultant. Tom _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users