Hi All, I have an equipment loaded with 4 X100P (numbered 1-4)) and one T400P (numbered 5-8). Everything works fine except that I cannot use one of the FXS ports (number 5).
If I configure zapata.conf to recognize it, the whole system voice quality suffers. I've tried already to switch PCI slots, with no results. Below is a snapshot of my /proc/interrupts, maybe this can shed some light on the problem. 0: 985385 XT-PIC timer 1: 3 XT-PIC keyboard 2: 0 XT-PIC cascade 3: 9832048 XT-PIC wcfxo 4: 318730 XT-PIC serial 5: 0 XT-PIC usb-uhci, usb-uhci, usb-uhci 7: 9832105 XT-PIC wcfxo 8: 1 XT-PIC rtc 9: 162893 XT-PIC eth0 10: 9818599 XT-PIC wcfxs 11: 20891396 XT-PIC wcfxo, wcfxo 12: 36 XT-PIC PS/2 Mouse 14: 26399 XT-PIC ide0 NMI: 0 LOC: 0 ERR: 0 MIS: 0 Any ideas? PHM _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
