Your line must provide disconnect supervision, which it sound like you say that it does, and you must configure that Zap trunk in asterisk for "kewl start" signaling (fxoks) which makes use of the disconnect supervision.
On 8/18/05, James Fogg <[EMAIL PROTECTED]> wrote: > I'm trying to use Asterisk as a voice mail system and all is going well > except for one issue. When the outside caller drops the connection > Asterisk doesn't sense it. It keeps the line open for about 2 minutes > before dropping it. The FXO is attached to a key system (hybrid PBX). > There was a home-type digital answering machine previously on the same > extension and it was able to sense disconnect without any problems. > > The interface is a non-Digium single port FXO card (modem) with R13 & > R19 removed to mimic the Digium card. The software is the current > release of [EMAIL PROTECTED] from ISO format (self booting CD that does an > OS install and Asterisk compile automagically). > > My question is if Asterisk has settings to control disconnect sense, or > do I have to look at the key system (hybrid PBX) that it's attached to. > > -James > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
