Hi all, I replaced a TE410P Rev C 1st Generation Firmware with a TE411P without any cfg changes (zaptel/zapata).
As a result Asterisk crashes on outbound from PRI4 going to PRI1 calls: Aug 23 18:22:00 WARNING[4693]: chan_zap.c:7545 zt_pri_error: PRI: !! Got a UA, but i'm in state 1 Aug 23 18:22:00 WARNING[4693]: chan_zap.c:7545 zt_pri_error: PRI: !! Got a UA, but i'm in state 1 Urgent handler Urgent handler -- Accepting overlap voice call from '4123655105' to '555115' on channel 0/26, span 4 -- Starting simple switch on 'Zap/119-1' Urgent handler Urgent handler Ouch ... error while writing audio data: : Broken pipe Junk at the beginning 49443303 Warning, flexibel rate not heavily tested! Segmentation fault Are there any changes to the config neccessary? Are there known issues with this Asterisk version? Can I temporarily disable the TE411 specific stuff to get asterisk running again? Platform: HP DL380G3 with 2x2.4Ghz, 1GB RAM, 1xTE411P,1xOctoBRI Version: Asterisk 1.0.9-BRIstuffed-0.2.0-RC8n zaptel.conf: span=1,1,0,ccs,hdb3,crc4 span=2,0,0,ccs,hdb3,crc4 span=3,0,0,ccs,hdb3,crc4 span=4,0,0,ccs,hdb3,crc4 zapata.conf: [channels] switchtype=euroisdn pridialplan=local prilocaldialplan=local priindication=outofband internationalprefix=00 nationalprefix=0 usecallingpres=yes hidecallerid=no busydetect=no ; not need on pri callprogress=no ; was yes but wiki says experimatley could be produce hangups callwaitingcallerid=yes ; show callerid on callwaitingcalls echotraining=no echocancel=yes echocancelwhenbridged=no overlapdial=yes immediate=no callerid=asreceived language=de rxgain=0.0 txgain=0.0 group=1 signalling=pri_cpe context=pri1 ;channel => 25-39,41-55 channel => 1-15,17-31 group=2 signalling=pri_cpe context=pri2 channel =>32-46,48-62 group=3 signalling=pri_net context=pri3 channel => 63-77,79-93 group=4 signalling=pri_net context=pri4 channel => 94-108,110-124 -- TIA, Bruno at ic3s dot de _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
