That is about what I have been seing for help. Has anyone any clue what to di with a 2600 that has a T1 adapter on a high-density high-density voice port adapter?
BTW... Because I am lazy, what does plar do? -Sean On Wed, 24 Sep 2003, Brian West wrote: > This is simple to do.. > > voice-port 1/0/0 > connection plar 9999 > ! > voice-port 1/0/1 > connection plar 9999 > ! > dial-peer voice 1000 voip > max-conn 4 > destination-pattern 9999 > req-qos guaranteed-delay > codec g711ulaw > ip precedence 5 > no vad > session target ipv4:x.x.x.x > ! > > in h323.conf set the context=blah > > [blah] > > exten => 9999,1,Goto(s,1) > > > Done... its really that simple. I have this working with a 2600 and a > 1750. > > bkw > > On Wed, 24 Sep 2003, Joseph Finley wrote: > > > I too would like to see it. I've tried many times with the help of a few > > and never got it to work. It always results in a fast busy. > > > > Joe > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Bartosz Jozwiak > > Sent: Wednesday, September 24, 2003 9:46 AM > > To: ASTERISK USERS > > Subject: [Asterisk-Users] Cisco 2600 and ASTERISK > > > > > > Hello, > > > > Could somebody tell me if I can connect CISCO 2600 router with support of > > H.323 to Asterisk ? > > If it is possible could somebody tell me how to do it. > > I would like to document it and put on some website so everyone can see it. > > > > Regards, > > > > -- bart > > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
