Can you post or email your patch can I take a look at it?
It's specifically the issue of NATD that I'd like to be able to know
what asterisk host a phone registers to. that way I can do an
asterisk to asterisk transfer and the original asterisk host that the
phone is registered to can pass the call back down the NATD connection.
-bill
I was going to add into Asterisk Realtime an extra field that is a
server identifier. For example to allow multiple asterisk machines
to use the same CDR DB. You would be able to select on the data from
just one of the servers.
We did this and it works fine as you might expect. Perhaps we
should put
it up on bugs.digium.com, but it wasn't a big change.
Also for example in sip.conf for registration. Have the specific
asterisk server that processes the sip registration put it's
identifier (IP address for example) into a field in the DB also.
That way other asterisk servers sharing the DB would be able to know
what asterisk server a SIP phone is registered to.
Does anybody else think this might be useful?
To my mind it doesn't make much difference where the phone is
registered
to. Registration is just a way to find out the contact info (IP
address
mainly) for the SIP user. Once we have that on one machine, in
principle
it can be used on any machine.
The only issue may be that NAT is open from the machine to which
the phone
originally registered, bt not from others.
So in our application we didn't bother to track which machine took the
original registration.
Steve
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
