Hi,
I've a Fritz card which was working fine, recently I changed
hardware and my nightmare started. Now when I call someone through the
chan_capi (0.3.5 or 0.4.0) it works fine but when I receive calls I
always get hungup. Can someone please give some help? Here are the logs:
*CLI>
-- CONNECT_IND ID=001 #0x0000 LEN=0049
Controller/PLCI/NCCI = 0x101
CIPValue = 0x1
CalledPartyNumber = <a1>1138121122
CallingPartyNumber = A<83>1181114000
CalledPartySubaddress = default
CallingPartySubaddress = default
BC = <80 90 a3>
LLC = default
HLC = default
AdditionalInfo = default
== CONNECT_IND
(PLCI=0x101,DID=1138121122,CID=1181114000,CIP=0x1,CONTROLLER=0x1)
-- creating pipe for PLCI=0x101 msn = *
-- INFO_IND ID=001 #0x0001 LEN=0026
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x70
InfoElement = <a1>1138121122
-- INFO_IND ID=001 #0x0001 LEN=0026
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x70
InfoElement = <a1>1138121122
> sent INFO_RESP (PLCI=0x101)
> sent CONNECT_RESP for PLCI = 0x101
-- INFO_IND ID=001 #0x0002 LEN=0016
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x18
InfoElement = <89>
-- INFO_IND ID=001 #0x0002 LEN=0016
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x18
InfoElement = <89>
> sent INFO_RESP (PLCI=0x101)
-- DISCONNECT_IND ID=001 #0x0003 LEN=0014
Controller/PLCI/NCCI = 0x101
Reason = 0x0
== DISCONNECT_IND PLCI=0x101 REASON=0
> sent DISCONNECT_RESP PLCI=0x101
-- CAPI Hangingup
> activehangingup
-- removed pipe for PLCI = 0x101
capi.conf
=======
;
; CAPI config
;
;
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.8
txgain=0.8
[interfaces]
; mode: ptmp (point-to-multipoint) or ptp (point-to-point)
isdnmode=ptp
; allow incoming calls to this list of MSNs, * == any
incomingmsn=*
; capi controller number
controller=1
; dialout group
group=1
; enable/disable software dtmf detection, recommended for AVM cards
softdtmf=1
; accountcode to use in CDRs
accountcode=
; context for incoming calls
context=from-pstn
; _VERY_PRIMITIVE_ echo suppression
;echosquelch=1
; EICON DIVA SERVER echo cancelation
;echocancel=yes
;echotail=64
; call group
;callgroup=1
; deflect incoming calls to 12345678 if all B channels are busy
;deflect=12345678
; number of concurrent calls on this controller (2 makes sense for
single BRI)
devices => 2
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
