On Wed, 2005-08-24 at 09:04 -0500, Eric Wieling aka ManxPower wrote:
> Joseph wrote:
> > On Tue, 2005-08-23 at 12:22 -0500, Eric Wieling aka ManxPower wrote:
> >
> >>I don't know what the problem is, but this is what I use and it works
> >>on
> >>my analog FXO port.
> >>
> >>exten => _9NXXNXXXXXX,1,Dial(${PSTN}/w${EXTEN:1})
> >
> >
> > I've been trying to duplicate your pattern but I get, Invalid extension:
> > exten => _51,1,Dial(SIP/[EMAIL PROTECTED]/ww218)
>
> Since you are not dialing out of an analog FXO port on Asterisk the
> aboce will not work. You are dialing out a SIP port to the SPA. You
> would need to use the D() option to dial, since it's not an analog Zap port.
I tried that too:
exten => _51,1,Dial(SIP/[EMAIL PROTECTED],30,D(ww218))
I think the extension is dialed before the phone is bridged, and it
should be dialed after the phone is bridged so the asterisk can detect
the DTMF while paying the message.
--
#Joseph
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
