James Golovich wrote:
On Wed, 24 Sep 2003, Steven Critchfield wrote:Got a similar setup, using a Mini-itx C3 800MHz in a Casetronix 2677 case. Like you, I have noise problems with the TDM400. My solution: use a Dlink 104S (US$80 off ebay). Now my box has 1 XP101 in the PCI slot and a cross cable to the Dlink. A really neat demo set that actually fits in a weekend bag. My only gripe with the C3, its FPU is slooooowwww (IIRC it's 1/2 clock speed). Right now, I'm thinking of getting the Nehemiah (full speed FPU). Have you taken a look at http://www.caseoutlet.com/NWPc/C137/c137_barebone.html? It's about US$400 for the 2 PCI slot version.
As a phone platform, it may be overkill, but I bet it could drive a
TDM400P card and be able to handle GSM compression. The question then
again is if it is worth the cost for basically a 4 port asterisk based
device like the ATA186?
I have a mini-itx board (800mhz) and case (I can look up the part number if anyone is interested), but the older TDM400P has the sound problems with the power supply in there. I've been meaning to contact digium to swap the card out and try a new rev in there but I haven't had the chance. For now I have a T100P working in there great.
I originally wanted to get the TDM400P working in there because its a great demo system to show people just what it can do. People are very impressed when you can walk in, plug a box in the ethernet (assuming dhcp), plug a phone into the back, and start making calls via IAX.
James
Leo
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
