On Sat, August 27, 2005 23:41, Michel Koenen said: > Hi all, > > I am struggling with the following and I can't get it work: > > In the Netherlands where I live it is possible to use special codes > (aka vertical service codes) to set special 'behaviour' of phonecalls. > So e.g. when I want to dial out with a normal phone and I dial > *31*<phonenumber to dial> then it will turn off my numberindication > (CID) at the called party. They seem to call this the 'keypad > protocol' but I cannot find this term when searching through asterisk > documents. > > My asterisk system is connected to an ISDN line with HFC card. I use > zaphfc module for that. In my extensions I tried several things to > dial out and use the *31* but without success. >
A few others are: Call forwarding: *21*<number># / #21# Delayed forwarding: *61*<number># / #21# Busy forwarding: *63*<number># / #63# (the ## numbers are to disable the service) I am glad to see this topic come up before I ran in to it myself! ;-) I'm curious about the answers... -- Francesco Peeters ---- GPG Key = AA69 E7C6 1D8A F148 160C D5C4 9943 6E38 D5E3 7704 If your program doesn't recognize my signature, please visit http://www.CAcert.org/index.php?id=3 to retrieve the Root CA certificate. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
