>> > >>>Hello All, > >>>I was wondering if I could do the following on asterisk... > >>> > >>>Get a T1 between 2 locations, and split it into a data channel of > >>> > >>> > >like > > > > > >>>1024, and use the rest for voice channels. > >>> > >>>Has anyone done this and had it working well? Or would I need to get > >>> > >>> > >a > > > > > >>>csu that allows a split into two interfaces? > >>> > >>>Regards, > >>>Greg > >>> > >>> > >>> > >>> > >>On a point-to-point t you will need hardware to split channels at both > >>ends. > >> > >>Since you posted to this list I assume that * is used at least on one > >>end of the t1. If you use good routers that can prioritize voip > >> > >> > >traffic > > > > > >>then all you need is ata's and/or ip phones at the other end. That > >> > >> > >gives > > > > > >>you more data bandwidth when the phones are not in use. Segregating > >> > >> > >n/24 > > > > > >>of your t is not so flexible. > >> > >> > >> > >That would be one way to do it, but both the Digium cards and the > >sangoma cards can be configured to route some of the 24 timeslots on a > >T1 to voice and some to data. > > > > > That means having a pc with one of those cards at each end and knowing > how to also config it as a router. I get standalone adtran t-1 routers > for about $650 in qty 1. > No doubt about that, not sure why the Greg wants to do what he is asking for, personally I would use 2 used Cisco routers with integrated T1 DSUs and priority queuing for VoIP, assuming VoIP phones at the remote location. That would be about $600 for qty 2 on ebay!
I just assumed Greg had a need for a T1 TDM interface on both ends. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
