I have 2 TE410P's and a TDM400P in same machine without issues Bart
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Damon Estep Sent: Sunday, August 28, 2005 10:59 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Multiple PCI cards > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Garth van Sittert > Sent: Sunday, August 28, 2005 11:46 AM > To: [email protected] > Subject: [Asterisk-Users] Multiple PCI cards > > Hi All > > Does anyone know if multiple Digium cards on a single machine will be a > problem. > > Machine specs: Dual Zeon 3.0GHz on Intel server board. > Cards: TE411P, TDM400P, TDM400P > > I will turn off all unnecessary PCI devices; USB, parallel, serial, etc... > > Thanks Have not tried it since November 2004, but at that time I ended up replacing the FXO/FXS cards with sipura SPA3000 ?(check model number, its been awhile). Each one gave 1FXO/1FXS port so 4 of them replaced 2 4 port TDM cads. Works well. Again, this was almost a year ago, so look for more feedback for users that have tried it with current hardware/firmware/software. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
