Please forgive me, if I misunderstand the problem completely.
Following instructions in several german blogs, I want to configure
Asterisk with a hfc-pci card, an old NTBA and an ISDN phone
as a SIP device.
It seems that I have to set signalling in zapata.conf to bri_net_ptmp.
When I do this, Asterisk will hang if started with -vvvvc, the last
lines of output being:
[res_features.so] => (Call Parking Resource)
== Parsing '/etc/asterisk/features.conf': Found
-- Registered extension context 'parkedcalls'
-- Added extension '700' priority 1 to parkedcalls
== Registered application 'ParkedCall'
== Registered application 'Park'
== Manager registered action ParkedCalls
== Registered application 'HoldedCall'
== Registered application 'AutoanswerLogin'
== Registered application 'Autoanswer'
[chan_zap.so] => (Zapata Telephony w/PRI)
== Parsing '/etc/asterisk/zapata.conf': Found
-- Registered channel 1, PRI Signalling signalling
-- Registered channel 2, PRI Signalling signalling
-- Automatically generated pseudo channel
Here it hangs.
If I change signalling back to "bri_net", the console
will appear.
If I try to connect to the "hung" Asterisk process
from another terminal with asterisk -r, everything
will look fine, except it seems that zap does not
work, e.g. the command "help" does not give me
the zap commands. show modules shows chan_zap
however:
monk:/etc/asterisk# asterisk -r
-- Remote UNIX connection
Asterisk , Copyright (C) 1999-2004 Digium.
Written by Mark Spencer <[EMAIL PROTECTED]>
=========================================================================
Connected to Asterisk currently running on monk (pid = 10973)
Verbosity is at least 5
monk*CLI> help
debug channel Enable debugging on a channel
help Display help list, or specific help on a command
load Load a dynamic module by name
logger reload Reopens the log files
logger rotate Rotates and reopens the log files
no debug channel Disable debugging on a channel
reload Reload configuration
set debug Set level of debug chattiness
set verbose Set level of verboseness
show applications Shows registered applications
show application Describe a specific application
show autoanswer Lists autoanswer channels
show channels Display information on channels
show channel Display information on a specific channel
show config handles Show Config Handles
show dialplan Show dialplan
show file formats Displays file formats
show image formats Displays image formats
show manager command Show manager command
show manager commands Show manager commands
show manager connected Show connected manager users
show modules List modules and info
show parkedcalls Lists parked calls
show switches Show alternative switches
show uptime Show uptime information
show version Display version info
soft hangup Request a hangup on a given channel
unload Unload a dynamic module by name
monk*CLI> show modules
Module Description Use Count
chan_modem.so Generic Voice Modem Driver 0
chan_modem_aopen.so A/Open (Rockwell Chipset) ITU-2 VoiceMod 0
res_musiconhold.so Music On Hold Resource 1
res_features.so Call Parking Resource 1
chan_zap.so Zapata Telephony w/PRI 0
monk*CLI>
My zapata.conf:
;
; Zapata telephony interface
;
; Configuration file
[channels]
;
; Default language
;
;language=en
;
; Default context
;
;
switchtype = euroisdn
; p2mp TE mode
signalling = bri_net_ptmp
;signalling = bri_net
; p2p TE mode
;signalling = bri_cpe
; p2mp NT mode
;signalling = bri_net_ptmp
; p2p NT mode
;signalling = bri_net
pridialplan = local
;prilocaldialplan = local
;nationalprefix = 0
;internationalprefix = 00
echocancel=yes
echotraining = 100
echocancelwhenbridged=yes
immediate=no
overlapdial=yes
group = 1
context=default
channel => 1-2
My zaptel.conf:
# hfc-s pci a span definition
# most of the values should be bogus because we are not really zaptel
loadzone=nl
defaultzone=nl
span=1,1,3,ccs,ami
bchan=1-2
dchan=3
dmesg snippet:
Zapata Telephony Interface Registered on major 196
PCI: Enabling device 0000:00:0d.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 10 (level,
low) -> IRQ 10
zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd0864f00 fifo
0xca778000(0xa778000) IRQ 10 HZ 1000
zaphfc: Card 0 configured for NT mode
zaphfc: 1 hfc-pci card(s) in this box.
Registered tone zone 3 (Netherlands)
Any Ideas?
TIA
/ralph
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
