Hi John, sorry to bother you but how can this be implemented?
can u give me a peice of the extensions.conf code that does that? by the way the FXO ports are always green they never change even if theres no line plugged in ---------- Original Message ---------------------------------- From: John Novack <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] Date: Mon, 29 Aug 2005 09:06:29 -0400 > > >bodra wrote: > >>yes thats one issue the other issue is that sometimes the pstn line is dead >>due to some technical problems so people trying to make calls will just >>listen silence and they'll never know whats going on... >> >> >Which should be less of a problem, given that the FXO card gives a red >alarm when there is no battery on the line. Priority + 101 could play an >error message in that case. > > >John Novack > > > > >>---------- Original Message ---------------------------------- >>From: Rich Adamson <[EMAIL PROTECTED]> >>Reply-To: Asterisk Users Mailing List - Non-Commercial >>Discussion<asterisk-users@lists.digium.com> >>Date: Sun, 28 Aug 2005 08:52:45 -0600 >> >> >> >>>>i need to know something in the zaptel configuration >>>>as it seems i can configure detecting the busy tone and hangup after number >>>>of busy tone >>>> >>>> >>>counts, that was great but the problem is sometimes the pstn line has no >>>dialtone and when i >>>try to make call it continue dialing while not having a dialtone! while it >>>should say "all >>>lines are busy/congested" how can i configure that?? >>> >>> >>>>i already done (immediate=no) and still it opens the zap trunk even when >>>>theres no dialtone >>>> >>>> >>>and shows that "zap/3 answered" >>> >>> >>>>----------------------------------------------------------------- >>>>;Specify whether the channel should be answered immediately or >>>>; if the simple switch should provide dialtone, read digits, etc. >>>>; >>>>immediate=no >>>>------------------------------------------------------------------ >>>> >>>> >>>I might be way off base here, but the immediate=no parameter is oriented >>>towards incoming zap calls (not outgoing calls), and the callprogress >>>and busy detect stuff was intended to detect busy tones (not dial tone). >>>I don't think there is any logic in the zap channels to "listen for >>>dial tone before dialing". (But, I could be wrong.) >>> >>>What are you using for the zap fxo channel (eg, channel bank, tdm, x100p)? >>> >>>Are you trying to play with the case where you have an analog phone >>>bridged on your fxo line, and detect the lack of dialtone when >>>someone is using that analog phone? >>> >>> >>> >>> >> >> > Powered by Hellacious Riders - http://www.hriders.com Want to be able to access your mail via POP 3? Please view: http://www.hriders.com/web_page.cfm?web_pageID=94 for more info. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users