Hi weicheng, I found your e-mail at the list. I bought a F1000 and configured it to connect on my [EMAIL PROTECTED]
But, some times the call is completed, some times no. Some times the F1000 call the other phone, but when I answer, I don't heard anything. Some times I call, I answer and heard the voice. I have Xten Soft phone, Soyo IP Phone and Polycom Ip Phone and all of them work good. I Just have problem with the F1000... I'm put bellow my SIP.CONF and ADDITIONAL.CONF: [general] port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) disallow=all allow=alaw allow=ulaw #allow=gsm #allow=g723.1 #allow=g729 context = from-sip-external ; Send unknown SIP callers to this context callerid = Unknown #include sip_nat.conf #include sip_custom.conf #include sip_additional.conf #allow=alaw #allow=gsm additional.comf [215] username=215 type=friend secret=215 record_out=Always record_in=Always qualify=no port=5060 nat=never [EMAIL PROTECTED] host=dynamic dtmfmode=rfc2833 context=from-internal canreinvite=no callerid="wifi" <215> On the F1000 I put RPT as 11100... Can you help me? Regards, ZN - Brazil -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of weicheng jiang Sent: sexta-feira, 24 de junho de 2005 21:26 To: [email protected] Subject: [Asterisk-Users] UTStarcom F1000 WiFi IP Phone Review I bought a UTStarcom F1000 WiFi IP Phone from http://www.luxoncomm.com and tested it with Asterisk. This is a my first impression of the device. The F1000 supports SIP. It looks and operates like a cell phone, and connects to the Internet through WiFi, so you can use it at any WiFi hotspot. I set up a 802.11b wi-fi network with a Linksys BEFW11S4 Wireless-B broadband router with no security requirement and SSID broadcast enabled. When I turned on the F1000 it automatically picked up the signal and connected to the network. Usage of the keypad is pretty intuitive, the buttons are the same as on a cell phone, I didn't bother to read the user guide. ;-) I scrolled to the Wi-Fi configuration menu and entered the domain of my asterisk server as the SIP proxy. In the same section I entered my asterisk user name and password. After a reboot the phone was registered to my asterisk server! I made a few calls and the call quality was fine, similar to a regular IP phone. I then took the phone to the office, it also picked up the wifi signal there and connected to the Internet automatically. Nice! I showed it off to my colleague and they wanted to get one too. I will follow up with a review of the advanced features such as call transfer and 3-way calling. - Lucas On Tue Jan 04, 2005 at 01:27:21PM -0500, Philippe Daoust wrote: > Anybody know anything about this F-1000 phone? > 100 hours of battery life, not bad at all... http://www.utstar.com/Solutions/Document_Library/Handsets/docs/WiFi/F1000Dat aSheet.pdf This quotes 48-80 hours standby, so you can probably reckon on it being towards the lower end of that in reality. Would be interested to hear the retail price of these (rather than the Vonage bundled price) Simon -- Simon Lockhart | * Sun Server Colocation * ADSL * Domain Registration * Director | * Domain & Web Hosting * Internet Consultancy * Bogons Ltd | * http://www.bogons.net/ * Email: info at bogons.net * ____________________________________________________ Yahoo! Sports Rekindle the Rivalries. Sign up for Fantasy Football http://football.fantasysports.yahoo.com _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
