On Wed, 2005-08-31 at 08:33 -0800, Matthew Schumacher wrote: > andrutto wrote: > > Hi, > > > > Few days ago I bought a Sipura SPA-3000 Gateway. Outgoing calls works > > fine but incomming calls behave very strange. When I dial my Sipura from > > outside and cancel befor picking up, the phone still rings for about one > > minut. What is wrong - the Sipura Gateway or I did something wrong with > > configuration. Does anyone know what I should do with this problem :). > > > > All the best > > > > Andrutto > > > > First, use the 3.1.3 firmware, the 3.1.5 firmware has echo problems. > Also, I configured mine based on the docs at > http://www.voip-info.org/tiki-index.php?page=Sipura%203000#comments and > I have it ringing though to a sip extension before picking up the pstn. > Works fine. >
I think it would depend on the hardware version as well, isn't it? For example I have: Software Version:2.0.13(GWg) Hardware Version:2.0.1(1813) And according to Sipura web-page they have listed two different firmware one for model 2.0 and one for 3.0 Model 2.0 3.0 SPA-3000 2.0.13g 3.1.5 Wouldn't the hardware 2.0.1 indicate model 2.0? so the firmware that would be required would be 2.0.13g, isn't it? -- #Joseph _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
