|
Hi,
I have a
little situation here :(
I have an
Asterisk working, and in another office, a Sipura SPA-3000.
I configured
the SPA and I have the extension working, the incomming trunk working, but the
outgoing trunk (peer) does not work.
The issue is
that I have a dynamic IP where the SPA is, and neither the SPA nor my router
have DynamicDNS.
So, if I
manually change the host for the peer for the SPA PSTN Line, then everything
works fine, and I can make local calls through it.
BUT when my
router's IP changes... I am lost. (EVEN while the extension SPAN Line 1, or the
incomming trunk are registered and DO work.)
According to
what I read, if I setup the outgoing trunk to type=peer with host=dynamic, then
I can make the peer to register itself into the Asterisk, so the asterisk will
know where to contact the peer.
But.... I
cannot figure out how to make the SPA register as the peer? I can make it
register as a type=friend for the incomming traffic, but not as a
peer..
The Line 1
part of the SPA is registering and working neatly.
BTW I have [EMAIL PROTECTED]
Any idea,
suggestion, or whatever you can think about it?
Thanks!!!
Alchaemist
|
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
