Hey everybody,
I have a situation where we have 2 Asterisk (CVS as of 08/25/2005)
connected via IAX. On the corporate side, we have 1 TE110P connecting
to a Definity G3R and it's connecting to a TN464F card, giving a 23
channel connection. I have echocancel=yes, echotraining=yes and
echocancelwhenbridged=yes.
One the remote office side, they a Adit 600 channel bank for 10 outside
lines and is using a Point to Point T1 for communications between divisions.
When there is a call on zap 1, from a sip phone on the remote office
side and typing 'zap show channel 1' shows echo cancel is on, doing the
same thing from the Definity to a SIP phone shows echo cancel off.
Shouldn't it be on during a call on both the incoming and outgoing legs
as long as it comes accross the PRI? Some (Myself included) have noted
a slight echo on the Definity to SIP leg of the connection.
My zapata.conf is below:
switchtype = national
context = incoming
signalling = pri_cpe
echocancel=yes
echotraining = yes
echocancelwhenbridged=yes
overlapdial = yes
group = 1
channel => 1-23
All suggestions would be welcome.
Thanks!
Doug
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
