Is your Asterisk server listening on port 5061? If not, just change the entry to 5060.
On Wed, 2005-08-31 at 16:36 -0600, Andres Paglayan wrote: > Hi, > > I am having problems on getting the second line to work on a Polycom 301, > > this is the phone.cfg file, > the * box is 192.168.1.8 and the phone is 192.168.1.18 > I am not 100% sure about what the reg.x.address should be, > with this setting I only get the line number to work, > the second just gives me busy signal, and its extension is not available. > I also tried [EMAIL PROTECTED] and 203 as the reg.2.address parameter but > without success, > the 203 extension setting in Asterisk is a clon of the 200 except for > the id and the port, (that matches this conf file) > > > <PHONE_CONFIG> > <OVERRIDES > reg.1.displayName="FD1" > reg.1.label="L1" > reg.1.address="192.168.1.18" > reg.1.server.1.address="192.168.1.8" > reg.1.server.1.port="5060" > reg.1.auth.userId="200" > reg.1.auth.password="123" > reg.2.displayName="FD2" > reg.2.label="L2" > reg.2.address="[EMAIL PROTECTED]" > reg.2.auth.userId="203" > reg.2.auth.password="123" > reg.2.server.1.address="192.168.1.8" > reg.2.server.1.port="5061"/> > </PHONE_CONFIG> > > Thanks for any help, > > Andres > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
