Hi, The PBX recives alarms from the TE110p card and are mainly pointing at frame errors and Loss of signal.
Asterisk is configured as Zapata.conf signalling=pri_cpe switchtype=national rxwink=250 channel => 1-15,17-31 Zaptel.conf .... This is what I need to know - the SPAN is currently set to E3 - does anyone know what I need to use for a E1 ? span=1,1,0,esf,b8zs bchan=1-15,17-31 # set this to 1-15,17-31 for E1 dchan=16 # set this to 16 for E1 loadzone = uk defaultzone = uk I am currently trying to connect a Meridian1 OP11 (card in the meridian box is a NTBK50AA 2mbPRI (E1)) with a asterisk server (TE110P card) however we are experiencing problems in the communication between the two. The pin outs are as follows PRI CARD PINS (rj45) 1 w/orange 2 orange 3 4 blue 5 w/blue 6 7 8 NTBK50AA has a Telco 50 connector PROVIDER PINS - as per the op11 DTI/PRI install/maint manual 48 blue 24 w/orange 23 orange 49 w/blue Any help will be greatly appreciated Thanks Chandra Mistry _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
