From: "Giordano Grandis" < [EMAIL PROTECTED]>
Subject: [Asterisk-Users] ztcfg problem
Hi all,
I'm installing two HFC pci card (both in TE mode), I don't have problem
when load module, but whrn I give "ztcfg -vv", I see 6 the six channels
that I configured, then my computer hang and I have to reboot it. (I'm
using a VIA Epia-M 1000 with Via C3 processor)
[EMAIL PROTECTED]:~# modprobe zaptel
[EMAIL PROTECTED]:~# insmod /usr/src/bristuff- 0.2.0-RC8n/zaphfc/./zaphfc.o
[EMAIL PROTECTED]:~# ztcfg -vv
Giordano,
It looks like you do a insmod of zaphfc.o while I think you have to do a insmod/modprobe of the zaphfc.ko Maybe that is causing your problem, if not, please supply us with the logging from /var/log/messages and/or other log files.
Regards,
Michel
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
