Depends what the beep sounds like ... but I've been having this system on a busy system which has XP100 and the Ethernet cards or other devices sharing one IRQ. You might need to spread out the IRQs so that XP100 get's its own and Ethernet gets another one of its own.
How fast of a system is it? Tomas -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ben Brown Sent: Friday, September 02, 2005 7:39 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] random beeps in MeetMe I have 3 users in a meetme conference. 2 of them are monitor only. I get a random beep in the audio during the conference. There appears to be no pattern. The 2 monitors are SIP softphones and the third is a POTS line on an XP100 card. disconnecting either of the monitors does not resolve the situation. This is currently a test box, so I would consider some sort of hardware issue a possibility, but I just want to make certain that there is not an asterisk issue here. Anyone have any thoughts on where I should start to look? Thanks BEN _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
