On Sat, 2005-09-03 at 20:47 +0200, Jeroen Baten wrote:
> I just changed in zapata.conf the signalling to:
> signalling = bri_net_ptmp
>
> and this changes the output considerably:
>
> *CLI>
> -- Executing Dial("SIP/4001-2fea", "Zap/2/<mycellphonenumber}") in new
> stack
> -- Called <mycellphonenumber}
> -- Channel 0/2, span 1 got hangup
> -- Hungup 'Zap/2-1'
> == No one is available to answer at this time
>
> *CLI>
Ok - what the heck is this?--------------------v
Dial("SIP/4001-2fea", "Zap/2/<mycellphonenumber}")
I've never seen a } used in a dial statement...
I saw that in your first message and (too) quickly deleted it.
Brett
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
