Hi Alex,
Sounds very much like the FXS card is unable to drive enough power to ping more
than 1-2 phones. I am also assuming you have the external power connected to the
PCI card.
In the UK the phone specification must be able to do this with 4 parallel phones
at an average acoustic sound pressure level from each.
I am still trying to get my FXS card working, but as soon as I do, I will make
some checks to see how it performs.
Thanks
Alex Ongena wrote:
I have a running * with a TDM40B board in it.
I have 3 analog phones that works (rings) perfectly when connected
to a Telco POTS line.
When connected to the Digium TDM40B (with FXS port), I have problems
with 'ringing':
1 phone 'ringes' normally
1 phone 'ringes' a bit cripled (instead of ring-ring... ring-ring..., it
does 'ring-ri... ri.... ring... ri...)
and the 3rd one does not ring at all when Asterisk says 'Ringing Zap/6'.
However, when I do an 'off-hook' on this phone, I get tone signal and
can dial and talk perfectly.
I have phones compliant to the Belgium (Belgacom) Telco specs.
Are there differences in 'Ring Voltage' ?
Anyone with a suggestion ?
Thanks
Alex
--
NEW: aXs GUARD hands-on Trainings v.7.0
more info at http://www.axsguard.com/indextraining.htm
aXs GUARD has completed security and anti-virus checks on this e-mail
(http://www.axsguard.com)
---------------------------------------------------
Able NV: ond.nr 0457.938.087
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Gary
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
