The special cable is to PROGRAM the unit not to CONNECT it There are separate port on the Nokia 32 to connect to a telephone SET and another port to connect to a telephone "LINE".. But in order to prepare the Nokia 32 to work as an FXS you need to PROGRAM it.
You need to isolate whether it is something wrong with the Nokia 32 - just connect an ordinary telephone set and dial out..(in fact, before dialling out, listen to the dialtone. Is it normal ? Or is there an sms tone indication as in (--- --- ---) If it does not work send a message to [EMAIL PROTECTED] If it is actually connected as an extension (i.e. you are using the Nokia 32 as an FXS connecting maybe to an FXO port on an spa3k or something) then you need to program it in several ways - FOR THAT YOU WILL NEED HARDWARE. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of andrutto Sent: Monday, September 05, 2005 22:42 To: [email protected] Subject: [Asterisk-Users] Re: Re: Nokia 32 Terminal >you don't really need a special cable for FXS, the cable is a standard >phone cable with a j11 4/6 pin plug. Just read the tech manual from the >nokia website for the pinout. Hi, I tried everything with no success. I even restore the factory defaults but without positive effect (call waiting service was disable). The terminal could not be broken because I receive calls. I checked the monitor and the signal was very strong. Dose anyone have some other tips. Regards Andrutto _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
