In article <200509091317.j89DGtY3019393 at commserver.noach.com>,
John Hill <jhill at noach.com> wrote:
> I store my speed dial numbers in the astdb key speeddial with the number
and
> then name separated by a -.
>
> This dial plan works fine:
> [speed-dial]
> exten => _*0XX,1,Set(temp=${DB(speeddial/${EXTEN:2})})
> exten => _*0XX,2,Cut(number=temp,,1)
> exten => _*0XX,3,Goto(house-phones,${number},1)
>
> The log informs me that cut is replaced with CUT.
>
> I rewrote the dial plan using CUT (as best I can figure out) The plan
below
> returns the entire string number-name and fails?
>
> [speed-dial]
> exten => _*0XX,1,Set(temp=${DB(speeddial/${EXTEN:2})})
> exten => _*0XX,2,CUT(temp,,1)
> exten => _*0XX,3,Goto(house-phones,${temp},1)
>
> What am I missing.
>The new CUT is a function, and should be used within a Set command.
>Something approximating (please check the detail):
>exten => _*0XX,1,Set(temp=${DB(speeddial/${EXTEN:2})})
>exten => _*0XX,2,Set(number=CUT(temp,,1))
>exten => _*0XX,3,Goto(house-phones,${number},1)
>Your second example is calling the same Cut command as the first.
>Cheers
>Tony
exten => _*0XX,2,Set(number=${CUT(temp,,1)})
That fixed it. I only had to add the ${} to get the string returned.
Thanks
--john
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
