No queuing won't be an option.. all the traffic I am thinking about will be voice traffic moving in and out of the Asterisk box..
Are you setting up this same senario where you are boing to have two data paths??
Later..
Low, Adam wrote:
WipeOut,
Well will you really run out of bandwidth ?
Would that be due to other (normal Internet traffic) traffic or would it all be RTP traffic, I ask because maybe some kind of priority queuing might be more effective ...
It's a good question, the source and destination address/port of RTP packets is negotiated with SIP and I strongly suspect that Asterisk will only ever provide the primary address of an interface as the source (although this maybe be adjustable with bindaddr config option).
I've just built a new Asterisk box so am going to try this out myself ... Will let you know ...
Rgds, Adam
-----Original Message-----
From: WipeOut [mailto:[EMAIL PROTECTED] Sent: 26 September 2003 11:36
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] RTP routing..
Here is a question for all you routing guru's out there..
I am using an ADSL line (512/256Kbps) to connect from the internet to my Asterisk server.. At a point I will run out of bandwidth so the cheapest option would be to add a second ADSL line..
The problem is how will the routing work?
If I put 2 IP's on one NIC will the return traffice be routed back via the gatway of the IP that is was recieved on or will it try and route all outbound traffic via the primary IP's gateway??
Would it be better to add 2 NICs instead of 2 IP's on one NIC?? although I don't see that this would change the routing logic..
Has anyone played with this type of setup?
later..
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
