Here is what I get when reloading IAX2:
Not every time, though
== Parsing '/etc/asterisk/iax.conf': Found
Sep 11 08:48:29 WARNING[3240]: chan_iax2.c:5402 iax2_register: Host
'iax.voipbuster.com' not found at line 164
Strange, because name resolves to IP address.
Ok, I reload IAX2 again and no more warning.
Then it tries to register and fails:
Tx-Frame Retry[000] -- OSeqno: 001 ISeqno: 000 Type: IAX Subclass: LAGRQ
Timestamp: 10018ms SCall: 00001 DCall: 00000 [213.61.187.146:4569]
Tx-Frame Retry[001] -- OSeqno: 001 ISeqno: 000 Type: IAX Subclass: LAGRQ
Timestamp: 10018ms SCall: 00001 DCall: 00000 [213.61.187.146:4569]
Tx-Frame Retry[002] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass:
REGREQ
Timestamp: 00017ms SCall: 00001 DCall: 00000 [213.61.187.146:4569]
USERNAME : USERNAME
REFRESH : 60
And so it goes.
Call then fails too...
I am suspecting two things:
1. I am starting to wonder if registering a user in Australia using
VoipBuster application does not create an IAX account....
Can someone who has an IAX account try creating one for me? Bogus name and
password. my e-mail is [EMAIL PROTECTED]
2. Firewall ports are not open. I am sure all the right ports are forwarded
to my * box (5060, 4569, 10000-20000).
I will set up ethereal on my firewallbox to see what comes out to the www
and what comes back.
Thanks,
Rudolf
----- Original Message -----
From: "Sander" <[EMAIL PROTECTED]>
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
<[email protected]>
Sent: Saturday, September 10, 2005 11:32 PM
Subject: RE: [Asterisk-Users] VoipBuster again
Iax.conf
register => username:[EMAIL PROTECTED]
Extensions.conf
exten =>
_0.,2,Dial(IAX2/username:[EMAIL PROTECTED]/${EXTEN:\1\},\
60,r)
Good luck :) Sander
-----Oorspronkelijk bericht-----
Van: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Namens Rudolf
Ladyzhenskii
Verzonden: zaterdag 10 september 2005 13:57
Aan: Asterisk Users Mailing List - Non-Commercial Discussion
Onderwerp: [Asterisk-Users] VoipBuster again
Hi, all
I am still battling to connect * and voipbuster.
What protocol does it use? Ethereal capture shows UDP traffic, but no SIP
or
IAX traffic when using their client.
VoipBuster client connects to connectionserver.voipbuster.com on port
11112
for authentication. Call itself is placed on different server.
I have tried to connect using SIP and IAX and it seems that no
authentication is happening. (i was trying to use sip.voipbuster.com and
iax.voipbuster.com). Does anyone currently use asterisk with voipbuster?
If
so, can you you help me to set it up? I am really lost.
My setup is :
sip.conf
[voipbuster]
type=peer
insecure=very
host=sip.voipbuster.com
username=NAME
secret=SECRET
fromdomain=sip.voipbuster.com
realm=voipbuster.com
iax.conf:
[voipbuster]
type=peer
host=iax.voipbuster.com
username=NAME
secret=NAME
notransfer=yes
qualify=no
extensions.conf: (I use 0 to dial out to IAX and 8 to dial out SIP) exten
=>
_0.,1,SetCallerID("CID Name" <CIDNUMBER>) exten =>
_0.,2,Dial,IAX2/voipbuster/00613${EXTEN:1}
exten => _8.,1,SetCallerID("CID Name" <CIDNUMBER>) exten =>
_8.,2,Dial,SIP/voipbuster/00613${EXTEN:1}
Thanks,
Rudolf
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
