> I know this subjeact has been beaten in here so much, but, here is my issue. > > I have a TDM400 with 2 ports tied into our telco lines. I have run fxotune on > the lines, and have got the conf file in my /etc > folder. I have fxotune loading in my startup right after the drivers load up, > then asterisk loads up. > > Problem! When calling out, we get a horible echo for about 20-40 seconds > before it starts to die off, and the calls becomre > normal. I have played with the echocancel and the echotraining settings, and > I still can not get the echo to go away. Also, > when tring to call out, i always seem to get a message that calls can not be > compleated as dialed. However, when I switch > to pulsdial=yes, then, all the calls start going out ok, its almost like the > touchtones are not being recognized properly. Its hit > and miss. I have even tried adjusting the rxgain and txgain. > I have a asterisk system at home, and i dont have this echo problem... > > I really need to get this system up and running, and, im at a loss as to what > to try next.
Paste a copy of your current fxo settings from zapata.conf Do you have any clue how far you are from the CO? What city & state? Have you played around with the different echo cancellers and the agressive canceler option? Which asterisk version are you using (stable or head, which ver)? Are you using sip phones when you hear echo, fxs modules on that same TDM card, or a soft phone (which one)? Paste a copy of the extensions.conf section that dials out (when you have the 'cannot be completed' message. When you dial out on a zap/fxo channel, what does the CLI output for the 'zap show channel xxxxx' show, where xxxxs is the channel in use for that call? When you made changes to the zapata.conf file, did you stop and restart asterisk? _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
