Well. Try this please (but only if you're running on the latest sources). Open wct4xxp.c sources and search for pci_module_init Replace it with pci_register_driver So the line should read: res = pci_register_driver(&t4_driver);
That allows you to get the card working on 2.6.13 in almost exactly the same setup as yours. One weird thing though. Do no use insmod ./wct4xxp.ko from zaptel directory as it will not work. Do a proper make install and then modprobe. This is just part of the fixes you might need to do. If you encounter a problem after span reconfiguration (ztcfg) let me know. If you get stuck.. let me know. Regards -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jason Kim Sent: Sunday, September 11, 2005 8:14 PM To: [email protected] Subject: RE: [Asterisk-Users] TE406p no interrupts I'm using FC3. uname -a ----------------------------------------- Linux billitipcc 2.6.9-1.667smp #1 SMP Tue Nov 2 15:09:11 EST 2004 x86_64 x86_64 x86_64 GNU/Linux _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
