We seem to be having problems at our office with lines locking up. It mainly seems to occur when we have someone call into a Fixed Cellular Trunk, at which point they use DISA to select an outgoing PSTN line or the other way round, when a call comes in and is transferred out to the cell phone. Although a few times it has happened to calls coming into the office and being transferred out to a local number.
We are running [EMAIL PROTECTED] 1.0 with 2 digium TDM04B cards, which has been handling these calls fine for about 3 months and now all of a sudden locks up. Originally we were just having the calls go to a extension that dialed zap/g0, so when it started locking up we changed it to a DISA command, but that made no difference. No other changes had been made on the system for at least three weeks. When zap barging the line we can hear screeching noises, similar to modem noises then it just goes silent. We are using busydetect=yes and busycount=6 and have not had any issues with line lock ups until a few days ago. We did have another digium card issue where only port 1 would respond, however we now run daily restarts and reprobe the cards. In the CLI with show channels it displays the bridged calls with it stuck on the DISA priority, as though its never detected the hangup. Any help would be greatly appreciated. Rick Lummis -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.22/98 - Release Date: 9/12/2005 _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
