Kevin Bockman wrote:
I'm having some problems getting TDMoE setup for the 1st time. I have a
TE405P installed in the main server with an ethernet cross-connection
to the secondary machine.
(Yes, I know about IAX2 but I want to use TDMoE to simulate using T1s.)
I'm using -HEAD from yesterday.
On the main machine
/etc/zaptel.conf:
loadzone = us
defaultzone=us
dynamic=eth,eth1/00:30:48:84:74:25,24,0
bchan=1-23
dhcan=24
If you loaded wct4xxp before ztd-eth/ztdynamic your channels should be:
1-96 TE405P
97-120 TDMoE
*CLI> zap show status
Description Alarms IRQ bpviol
CRC4
T4XXP (PCI) Card 0 Span 1 OK 0 0 0
T4XXP (PCI) Card 0 Span 2 UNCONFIGUR 0 0 0
T4XXP (PCI) Card 0 Span 3 UNCONFIGUR 0 0 0
T4XXP (PCI) Card 0 Span 4 UNCONFIGUR 0 0 0
Dynamic 'eth' span at 'eth1/00:30:48:84ยท RED 0 0 0
Leonardo
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
