Hi !
Asterisk sends a RELASE COMPLETE with cause code 34. It seems that
Nortel expects a RELEASE message in this state. The conversion
is done in the protocol engine of the MSDL.
Why would you want the cause code 34 to be sent ? Do you need a
special rerouting on the Nortel side ?
Would it be a help if you send a cause 3 ? (RELASE msg)
Best regards
Hans
Tirpák Miklós schrieb:
Hi!
My asterisk (1.0.7) is connected to a Nortel pbx with Digium E100P card,
both side are ETSI EuroISDN. I would like to reject an incomming call
with cause code 34, but the Nortel PBX gets the value of 31 instead of
34. It seems to work on the asterisk side:
< Protocol Discriminator: Q.931 (8) len=41
< Call Ref: len= 2 (reference 17162/0x430A) (Originator)
< Message type: SETUP (5)
...
> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 49930/0xC30A) (Terminator)
> Message type: RELEASE COMPLETE (90)
> [08 02 81 a2]
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
Location: Private network serving the local user (1)
> Ext: 1 Cause: Circuit/channel congestion (34),
class = Network Congestion (2) ]
My macro looks like:
exten => s,1,SetVar(PRI_CAUSE=34)
exten => s,2,Hangup
According to the debug on Nortel it gets 31 cause code in the release
complete q.931 message. Do you have any idea?
Thanks,
Miklos
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
